
Home architecture guide
Permanent Lighting for Two-Story & Multi-Gable Homes
More rooflines mean more choices. On a two-story or multi-gable home, the best layouts decide which lines lead, which support, and which stay dark, so the house looks designed rather than traced.
Start with a visual hierarchy
Look at the house from the street and pick the lines that define it: usually the largest front gables, the gable over the entry and the main eave. Those lead. Smaller peaks, side returns and back rooflines support them, or stay dark.
Lighting every edge at the same brightness flattens the house. Letting a few strong lines lead keeps the architecture readable at night.

Overlapping peaks and interrupted eaves
Multi-gable homes often have peaks that overlap from the street, eaves interrupted by dormers, and transitions between the first and second story. Each transition needs a clean turn or a deliberate stop. Planning those points is most of the design work on a complex roofline.
Both sides of a gable run in the same channel and finish, so a peak always reads as one line.

Zones and power
Zones let parts of the house run different scenes at the same time: warm white on the main house, color on the garage, or a soft glow on a back patio. EverLights adds wireless zone receivers for areas like a detached garage or shop.
Larger homes also need more power. EverLights rates a SmartBright power supply for up to 300 feet of lights in each direction and 500 feet total, so we place power supplies where the runs need them. See our voltage guide.
Access, complexity and price
Second-story eaves, steep pitches and many transitions take more time and equipment to install safely. That is reflected in the price per foot. See pricing for current ranges.
Multi-gable homes, lit
A few examples of layouts on larger, more complex rooflines.

Every gable lit for the holidays 
A rainbow across every gable 
Multicolor on a modern two-story home
EverLights installation examples from separate homes.
Two-story & multi-gable FAQ
Do I need to light every gable?
No. Lighting the primary gables and the main eave lines often gives a cleaner result than tracing every edge equally. Secondary peaks can be included, left dark, or set to a different scene.
Does a two-story or multi-gable home cost more to light?
It can. Second-story eaves, steep pitches and more transitions take more time and equipment. Permanent roofline lighting typically runs $29–$34 per linear foot for EverLights SmartBright, $25–$29 for EverLights ClickLights and $14–$19 for ASAHOM, depending on the home, roofline complexity, access, layout and project scope.
Can different parts of the roofline show different colors?
Yes. Both EverLights and ASAHOM support zones, so sections of the house can run their own colors and effects at the same time. EverLights adds wireless zone receivers for areas such as a detached garage or shop.
How far can one EverLights run go?
EverLights rates a SmartBright power supply for up to 300 feet of lights in each direction and 500 feet total. Larger homes get additional power supplies, planned around the actual layout of your roofline.
Plan Your Multi-Gable Layout
Request a free quote and we'll design a layout that lets the right lines lead.