
Technology guide
12V vs 24V vs 48V vs 60V Permanent Lighting
Permanent lighting systems run anywhere from 12V to 60V. Voltage affects how far a run can go and how the system is powered, but it does not decide quality on its own. Here is what the numbers mean.
Voltage, current and voltage drop
Power is voltage times current. At the same power, a 48V or 60V system carries a fraction of the current of a 12V system. Less current means less voltage lost along the wire, which is called voltage drop.
Voltage drop shows up at the far end of a long run as dimming or a color shift. Higher-voltage systems can run farther before that happens; lower-voltage systems need power fed in more often.

How EverLights plans power
EverLights rates each power supply by how many feet of lights it can carry in each direction and in total. A power supply in the middle of a run can feed lights both ways, so placement matters as much as the number of supplies.
- SmartBright and SmartBright Pro: up to 300 feet of lights in each direction, 500 feet total per supply. We install them on 60V supplies.
- ClickLights: 24V, up to 200 feet in each direction, 400 feet total per supply.
SmartBright wiring also has fuse-based data failover, so a single failed light is less likely to knock out the lights after it.
What common systems use
| System | Voltage | Run length notes | Source |
|---|---|---|---|
| EverLights SmartBright and SmartBright Pro | 12–60V (60V supplies) | Up to 300 ft each direction, 500 ft total per supply | EverLights product comparison sheet (dealer material) |
| EverLights ClickLights | 24V | Up to 200 ft each direction, 400 ft total per supply | EverLights product comparison sheet (dealer material) |
| JellyFish Smart Eave Lights | 48V DC (lights) | 250 ft of lights per power supply | JellyFish Smart Eave Lights (opens in new tab) |
| Govee Permanent Outdoor Lights Pro | 36V adapter | Up to 200 ft total; driver module needed beyond 150 ft | Govee Permanent Outdoor Lights Pro (opens in new tab) |
| Govee Permanent Outdoor Lights Prism | 36V adapter | Up to 200 ft total | Govee Permanent Outdoor Lights Prism (opens in new tab) |
| Gemstone Lights track lighting | 12V | Converted from household power | Gemstone Lights guide (opens in new tab) |
| Trimlight Classic and 3L | 12V | Roofline bulbs | Trimlight residential (opens in new tab) |
Other manufacturers' figures checked against their published information on October 4, 2026.
Why voltage alone does not decide quality
A well-designed 12V system with good wiring and planned power can outperform a poorly installed higher-voltage one. Wire gauge, power supply placement, data protection, LED quality and the installer matter just as much. All of these systems are low-voltage DC and safe on a home.
See how EverLights compares with other brands on our comparison pages.
Voltage FAQ
Is higher-voltage permanent lighting better?
Not automatically. At the same power, a higher-voltage system carries less current, which reduces voltage drop and wire losses on long runs. Wire, power supply placement, controller design and installation quality matter just as much.
What is voltage drop?
Voltage drop is the voltage lost along a wire as current flows through its resistance. On long lighting runs it can show up as dimming or color shift toward the far end if the system is not powered correctly.
Why do long runs need more than one power supply?
Each power supply can only carry so many lights before voltage drop shows. EverLights rates SmartBright for 300 feet of lights in each direction and 500 feet total per supply, and ClickLights for 200 feet in each direction and 400 feet total, so bigger homes get more supplies.
Is 12V permanent lighting unsafe?
No. 12V, 24V, 36V, 48V and 60V permanent lighting systems are all low-voltage DC systems. The choice of voltage is about efficiency over distance and overall system design, not about one being unsafe.
What voltage do common permanent lighting systems use?
As published: EverLights SmartBright runs from 12V to 60V and we install it on 60V supplies, EverLights ClickLights is 24V, JellyFish lists 48V DC for its eave lights, Govee’s Pro and Prism models use 36V adapters, and Trimlight and Gemstone list 12V for their roofline lights.
Plan Power for Your Roofline
Request a free quote and we'll design runs and power supplies around your home.